MAX2015EVKIT【PDF 1/5 页】EVAL KIT FOR MAX2015

收藏本站

您好，
买卖IC网欢迎您。
请登录
免费注册

买卖IC网

Sheet目录471

[1页]2页 3页 4页 5页

19-3083; Rev 0; 12/03

MAX2015 Evaluation Kit

General Description

The MAX2015 evaluation kit (EV kit) is a fully assembled

and tested surface-mount circuit board that allows for

easy evaluation of the MAX2015 RF power detector/

controller. The MAX2015 EV kit includes connections to

operate the device as a detector or as a controller. The

RF input utilizes a 50 Ω SMA connector for convenient

connection to test equipment.

Component List

Features

? Complete RF Power Detector/Controller

? 50MHz to 2.7GHz Frequency Range

? 2.7V to 5.25V Single-Supply Operation*

? 50 Ω SMA Connector on RF Input

? Fully Assembled and Tested Surface-Mount

Board

* See EV Kit Schematic (Figure 3).

Ordering Information

DESIGNATION

QTY

DESCRIPTION

680pF ±5%, 50V C0G ceramic

PART

MAX2015EVKIT

TEMP RANGE

-40°C to +85°C

IC PACKAGE

8 μMAX

C1, C2

capacitors (0603)

Murata GRM1885C1H681J

100pF ±5%, 50V C0G ceramic

Quick Start

The MAX2015 EV kit is fully assembled and factory

C3, C5

capacitors (0603)

Murata GRM1885C1H101J

tested. See the Connections and Setup section for

proper device evaluation.

C4, C6

J1–J4

0.1μF ±10%, 16V X7R ceramic

capacitors (0603)

Murata GRM188R71C104K

10μF ±10%,16V tantalum capacitor

(C case)

AVX TAJC106K016R

Not installed (0603)

PC board edge-mount SMA RF

connectors (flat-tab launch)

Johnson 142-0741-856

Recommended Equipment

DC power supply capable of delivering between

2.7V and 3.6V at 25mA

Signal generator capable of delivering -70dBm to

+10dBm at frequencies between 50MHz and

2.7GHz

High-dynamic-range RF power meter for calibrat-

ing the signal generator

Three digital multimeters (DMMs) to monitor sup-

ply voltage, supply current, and output voltage

6dB attenuator pad

R1–R5

R6, R7

TP1

TP2

0 Ω (0603) resistors

Not installed (0603)

Large test point for 0.062in PC board

(red)

Mouser 151-107 or equivalent

Large test point for 0.062in PC board

(black)

Mouser 151-103 or equivalent

MAX2015EUA-T

Connections and Setup

This section provides a step-by-step guide to testing the

basic functionality of the EV kit. As a general precaution

to prevent damaging the device, do not turn on the DC

power or the RF signal generator until all connec-

tions are made:

1) With the DC power supply disabled, set it to +3.3V

(through a low internal resistance ammeter, if

desired) and connect to the VCC terminal. Connect

the power-supply ground to the GND terminal on

the EV kit. If available, set the current limit to 25mA.

2) Calibrate the power meter at 100MHz.

Component Suppliers

3) Connect the RF signal generator to the power

SUPPLIER

Johnson

Murata

PHONE

507-833-8822

770-436-1300

WEBSITE

www.johnsoncomponents.com

www.murata.com

meter through a 6dB attenuator pad.

________________________________________________________________ Maxim Integrated Products

For pricing, delivery, and ordering information, please contact Maxim/Dallas Direct! at

1-888-629-4642, or visit Maxim’s website at www.maxim-ic.com.

发布紧急采购，3分钟左右您将得到回复。

采购需求

(若只采购一条型号，填写一行即可)

*型号	*数量	厂商	批号	封装

添加更多采购

采购需求

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

我的联系方式